H Type Power Press Manufacturer, Mechanical Press

JS36 Straight Side Power Press

JS36 straight side power press(press machine,punching press,mechanical press),capacity ranges from 250 ton to 2000 ton. The press adopts eccentric gear transmission system with longer stroke length and more power energy, most suitable for car body parts stamping.

The press can be disassembled as crown, slide, columns and bolster which are fixed with tie rods and nuts. Big table and customized table size, shut height, stroke length are widely conform to progressive die stamping and big sheet parts stamping process

SPECIFICATION

Item		Unit	JS36-250	JS36-315	JS36-400	JS36-500	JS36-630	JS36-800	JS36-1000
Nominal capacity		KN	2500	3150	4000	5000	6300	8000	10000
Stroke under nominal force		mm	13	13	13	13	13	13	13
Slide stroke length		mm	400	400	400	500	500	500	500
Stroke speed		times/min	16-25	16-25	13-20	13-20	13-18	10-16	10-16
Max. die shut height		mm	600	700	800	800	900	1000	1100
Die shut height adjustment		mm	250	250	300	350	400	400	400
Slide bottom size	L-R	mm	2500	2800	2800	3200	3500	3600	4200
Slide bottom size	F-B	mm	1300	1400	1500	1600	1600	1800	1800
Size of worktable	L-R	mm	2500	2800	2800	3200	3500	3600	4200
Size of worktable	F-B	mm	1300	1400	1500	1600	1600	1800	1800
Power of electric motor		KW	30	37	45	55	75	90	110
Height above floor		mm	6700	7100	7300	7700	8200	8600	9200

CUSTOMER GROUPS

factories, manufacturing plants, such as auto parts manufacturers, household appliances such as air conditioners, refrigerators, washing machines, dishes, kitchen sinks, motorcycle parts manufacturers, chain manufacturers, computer electronics manufacturers, etc.

CLOSE TYPE H FRAME BODY

The steel welded structure is heat treatment and ball blasting to release the welding stress. The press body can be disassembled to four parts: crown, bolster, slide and columns which are fixed by tie rod bolts and nuts.

It is better to produce press according to customers' special specifications cause of this structure design. Seller will send engineer to buyer's factory for installation service. Foundation drawings will be sent to buyer before shipment.All the body parts are machined by PAMA machine center. Just need to fix the part on the machine table and all the surfaces will be finished machining in one time.High accuracy lengthened slide guides are fixed on the columns. The guides can be fine adjust by bolts to get better parallelism and squareness.

ECCENTRIC GEAR TRANSMISSION

Two big eccentric gears with link rods and guide pillars. Eccentric gear transmission system gives the press bigger stroke length than crank type press. Guide pillars and bushes ensure higher precession. All the gears are strenghtened and grinding, lower noise and longer service life.

Power from the motor to the clutch. The two eccentric gears are connected with the clutch drive gear with a middle gear. Thress stages transmission make it more stable.

SEPARATE DRY TYPE CLUTCH AND BRAKE

Self-produced dry type clutch and brake, adpots high quality clutch blocks. The clutch is under dynamic balance testing.Clutch working: dual-safety valve opens and the high pressure air goes inside the cylinder, moves the brake block away and press the cluch block to work. Then flywheel shaft will rotate with the flywheel.

Brake working: dual-safety valve closes and the high pressure air goes out.The brake blocks will press on the brake body under the pressure of the springs. Thus the brake works and stops the flywheel.

OPTIONAL AIR CUSHION AND MOVABLE TABLE

Full air type cushion is optional. Stroke adjustable and lock function are available too.

Movable table is optional, front move, left to right move and T type move are available.

Full air type cushion has the same capacity of pressing and ejection.Independ air tank for cushion ensures the variation of air pressure no less than 10%.

Add

• Exporting Office: 12F, Huaihai Road West, Shanghai, China
• Factory: Picheng World Industrial Park, Danyang City, Jiangsu Province, China

Sitemap

JS36 Straight Side h type Power Press