jackow@pressmachine-world.com+86-13817590728 WORLD power press machine manufacturer and supplier
WORLD Press Machine - Leader in Power Press Machinery Manufacturing
Application of Press Machinery
Precision and reliability are critical in producing automotive components. Our presses ensure high-quality parts with minimal downtime.
One-Stop Power Press Machine Solution
1. Preparation before starting
Safety check
Confirm that the emergency stop button, safety grating, and protective cover are intact.
Check the oil level of the lubrication system to ensure that the guide rails and sliders are adequately lubricated.
Mould installation
Use the lifting equipment to align the upper and lower molds with the press workbench and tighten the bolts (the torque must meet the requirements of the manual).
Adjust the closing height to ensure that the mold stroke matches the machine parameters.
2. Parameter setting
Enter processing parameters
Set the nominal force, number of strokes, and slider stroke through the control panel (if the mechanical press needs to adjust the flywheel balance).
Hydraulic presses need to set the holding time and boost pressure (refer to the material thickness and hardness).
Test run (inching mode)
Test the mold closing with a single stroke (Single Stroke) to observe whether it is stuck or unusual.
3. Formal production
Start the automatic mode
Switch to the continuous operation mode (Continuous Run) and start the feeder to feed synchronously.
Monitor the pressure gauge value to ensure that the actual load does not exceed 80% of the rated nominal force.
Quality Control
Check the workpiece size every 30 minutes (using tools such as calipers and projectors) and adjust the mold offset.
4. Shutdown and Maintenance
Shutdown Steps
Before turning off the main power, stop the slider at the bottom dead center (to protect the mold and machine structure).
Clean the workbench waste and apply anti-rust oil.
Daily Maintenance
Daily Inspection: Lubrication point refueling, air line drainage, bolt tightening.
Monthly Maintenance: Replace hydraulic oil filter, calibrate pressure sensor.
5. Safety Precautions
Operator Qualification
Must pass the training and hold a press operation certificate (such as OSHA 1910.217 certification).
Emergency Handling
If abnormal vibration or noise is found, immediately press the emergency stop button and contact maintenance personnel for investigation.
FAQ About World Press Machine
Contact Us
WORLD is dedicated to helping clients solve their most challenging products and technology issues.Please complete the form below, and our sales team will be in touch with you shortly.
Quick Links
Contact Us
• Tel: 86-21-62828320
• Fax: 86-21-62829970
• E-mail: jackow@pressmachine-world.com
• WHATSAPP: +8613817590728
• WEHCHAT: W13817590728
Add
• Exporting Office: 12F, Huaihai Road West, Shanghai, China
• Factory: Picheng World Industrial Park, Danyang City, Jiangsu Province, China