JX36 Straight Side power Press Machine&h frame press

Inquiry

Write a Review

JX36 Straight Side Press Machine

JX36 Straight Side Double Crank Press Machine(Punching Press,power press machine), with capacity from 400 ton to 1000 ton, most suitable for big sheet metal stamping and progressive die stamping process.

The press body can be disassembled as crown, columns, bolster and slide, which is easy for shipment. Two eccentric crankshafts are left to right located, ensure the big table with power balance. Specifications can be customized to meet more customers' request.

JX36 Straight Side power Press Machine&h frame press 2

SPECIFICATION

ITEM		JX36-400	JX36-500	JX36-630	JX36-800	JX36-1000
Nominal Capacity	KN	400	5000	6300	8000	10000
Rated Tonnage Point	mm	9	12	12	12	12
Stoke Length	mm	300	300	350	350	400
Stroke Speed	spm	20-35	20-35	20-30	15-25	15-25
Max. Die Shut Height	mm	650	650	700	800	900
Die Shut Height Adjustment	mm	200	200	250	250	250
Table Size (FBxLR)	mm	1300×3000	1500×3000	1500×3600	2000×4000	2000×4000
Table Thickness	mm	220	220	250	250	250
Slide Bottom Size (FB-LR)	mm	1300×3000	1500×3000	1500×3600	2000×4000	2000×4000
Window Opening (FBxH)	mm	1000×650	1100×650	1200×700	1600×800	1600×900
Table Height	mm	710	710	710	710	710
Motor Power	KW	45	55	75	75	90
Overall Dimensions (LxWxH)	mm		3330x4650x 7250	3800x5400x 7700	4200x6150x 9200	4600x6150x 9900
Approximate Weight	T	80	90	120	150	190

OPTIONS

Light curtain; Inverter; Cushion; Decoiler; Straightener; NC Feeder; Transfer Bar; Manipulator;

DRY TYPE CLUTCH AND BRAKE

World self-produced dry type clutch and brake, big torque and low noise.

High quality clutch blocks ensures the longer service life. The clutch and brake is left to right located on the top of press crown. The middle gearbox contacted with the drive shaft gears and transfer the power to the side two big gears through the pinion gears on shaft sides.

The clutch is under dynamic balance running testing before installation to the press.

Clutch and brake are separted at two sides. It is controlled by the dual-safty solenoid valve.

JX36 Straight Side power Press Machine&h frame press 3

DOUBLE CRANK TRANSMISSION

Two crankshafts left to right located. This design makes the press bolster left to right size be bigger to conform to big progressive die stamping request.

Timing is through the drive shaft pinion gears and the side big gears.Crankshaft is hot forging steel and under grinding process.All the gears are grinding and strenghened.

JX36 Straight Side power Press Machine&h frame press 4

STRONG WELDED STRUCTURE

The welded structure includes the top crown, the side columns, the slide and bolster. These parts are fixed together through the tie rods and nuts which is hydraulic locked. All welded parts are under heat treatment and sand blasting process to get high rigidity. Table size and shut height are

customized.