JW31-200 Ton Single Piont Pneumatic Die Punching Machine1

Place of Origin:

Jiangsu China

Payment:

L/C, T/T

MOQ:

Brand:

WORLD

Inquiry

Write a Review

Supply Ability

2000 Unit/Units per Year

Start Port

Shanghai China

Material

Metal

Delivery Time

45 days

Certification

CE, CCC

Availability

OEM

JW31 H Frame Single Crank Power Press

JW31 H frame single crank power press is applicable to light, thin material, for single, and progressive die application in blanking, piercing, bending, forming, interlink with ROT line or transfer unit. High rigidity frame, applications suitable for various kinds of stamping works.

The press capacity is from 160ton to 630ton. Slide guide 8 faces for higher precision.

JW31-200 Ton Single Piont Pneumatic Die Punching Machine1 7

SPECIFICATION

ITEM		CODE	UNIT	JW31-160	JW31-200	JW31-250	JW31-315	JW31-400	JW31-500
Nominal Capacity		Pe	KN	1600	2000	2500	3150	4000	5000
Slide Stroke		s	mm	180	200	220	220	250	250
Slide Stroke Speed	Fixed	n	spm	45	35	30	30	25	20
Slide Stroke Speed	Variable	n	spm	25-50	25-45	20-35	20-35	20-30	15-25
Max. Die Shut Height		H2	mm	400	450	500	550	600	650
Die Shut Height Adjustment		t	mm	110	110	120	120	120	120
Side Window Size	F-B	E	mm	650	750	800	850	900	1000
Side Window Size	Height	F	mm	350	420	430	480	520	650
Distance Between Uprights		G	mm	1100	1200	1300	1350	1450	1650
Table Size	F-B	D	mm	650	750	800	850	900	1000
	L-R	C	mm	1000	1100	1200	1250	1350	1500
	Thickness	H3	mm	165	180	190	190	200	220
Table Hole Diameter			mm	180	200	200	220	220	220
Slide Bottom Size	F-B	b	mm	600	700	750	800	850	950
Slide Bottom Size	L-R	a	mm	750	850	950	1000	1100	1250
Table Surface Height		H1	mm	1005	1115	1205	1215	1225	1225
Overall Dimensions	F-B	A	mm	2200	2300	2500	2600	2700	3100
	L-R	B	mm	1780	2000	2050	2200	2370	2600
	Height	H	mm	3800	4200	4500	4550	4900	5400
Motor Power			KW	15	18.5	22	30	37	45
Weight(approximate)			kg	16000	22000	27500	30000	36500	47500

OPTIONS

Light curtain; Inverter; Cushion; Decoiler; Straightener; NC Feeder; Transfer Bar; Manipulator;

H FRAME BODY WITH HIGH RIGIDITY

JW31 pneumatic die punching machine uses a strong H frame body. The press body is steel welded

with high quality steel plates by carbon dioxide arc welding. After welding, all the weld seams must pass the examination of ultrasonic inspection. The top transmission gearbox is tested by oil bath to avoid any oil leak.

Then, the press body will be heat treatment and sand blasting. All these treatments will help to release the welding stress for high rigidity. Press structure is optimized by computer and all the key power points are strengthened.

JW31-200 Ton Single Piont Pneumatic Die Punching Machine1 8

WET TYPE PNEUMATIC CLUTCH AND BRAKE

Wet type pneumatic clutch with imported clutch disc, NOK seals, lower noise and maintenance cost, longer service life.

Press with pneumatic wet clutch can work as continuous, inches or single stroke, more choices for operators.

JW31-200 Ton Single Piont Pneumatic Die Punching Machine1 9

Siemens Motor, Schneider Electric Components

The press is equipped with Siemens main motor and Schneider electric components.

JW31-200 Ton Single Piont Pneumatic Die Punching Machine1 10

Hydraulic Overload Protected Pump

The press is standard equipped with Japanese SHOWA hydraulic overload pump. Normally the system is set as 110% of the nominal capacity. The press will stop immediately once it is overload than 110% to protect both the press and the die. It is easy to reset the overload as there is a reset switch on the control panel. The system can be reset within 3 minutes.

Panasonic or Omron or Schneider PLC

PLC control system can be Panasonic or Ormon or Schneider brand.

OPERAITON AND MAINTENANCE

JW31 pneumatic press is PLC control with HMI and cam controller. The press has both mechanical and electrical cam controllers. It is easy to set the cam angles to match the press with automatic NC feeders or press transfer system. HMI has the function as with system setting, lubrication setting, I/O monitor, counter setting and TDC reset.Auto grease pump is standard equipped on the press and the operator can set the lubrication frequency by the HMI according to the working time or working stroke times.

Operator only needs to check whether enough grease in the cup every working day.Press ram is adjusted by brake motor with a digital shut height indicator. Precision is 0.1mm.There is a button and an up/down selection switch on the control panel. So easy to test the die height when install the die or change the die.