The process of pressing the press on the motor bearing

The process of pressing the press on the motor bearing

First, place the motors and bearings to be used for production in a fixed position in order to facilitate the material taking, and then fix the fixture on the press, connect the press to the power supply, and run it idly after starting the machine to ensure that The press can work normally. In order to avoid crushing the workpiece, first select the press as the manual function when starting to press, and then use the press to slowly press down after the motor and bearing are placed in the fixture to find a suitable pressure. In the installation position, the data recorded by the press is saved and input into the parameter system. At this time, the press can be converted into an automatic function, and the motor and bearing can be press-fitted in the automatic mode. This article comes from the hydraulic manufacturer WORLD Press Machine official website www.pressmachine-world.com, please indicate the source for reprinting!