The features of the press are as follows

The features of the press are as follows:

(1) Improve productivity

The stroke length can be set to the minimum value necessary for production. It is possible to maintain the molding speed suitable for the processing content.

(2) High product precision

Through closed-loop feedback control, the accuracy of the bottom dead center is always guaranteed. Suppress product burrs and prevent defective products from occurring.

(3) Low noise and long die life

With the low noise mode (that is, reducing the contact speed between the slider and the sheet), the noise is greatly reduced compared to general mechanical presses. and mold

The vibration is small and the life is long.

(4) Controllability of slider movement

Users can use this feature to program a slider motion mode suitable for the processing technology, which can effectively improve the accuracy and stability of the product, improve the life and productivity of the mold, and can realize silent punching and even expand the processing range (such as magnesium alloys). Stamping, etc.), suitable for processes such as blanking, deep drawing, embossing and bending, as well as characteristic curves of different materials. If the sliding block can be stopped to keep the pressure, the purpose is to improve the forming quality of the parts.

(5) Energy saving and environmental protection! Energy-consuming components such as flywheels and clutches of traditional mechanical presses are cancelled, driving parts are reduced, and the mechanical transmission structure is simplified; the amount of lubricating oil is small, and the stroke is controllable; due to the low power consumption, the operating cost is also significantly reduce.

This article is from the official website of the manufacturer WORLD Press Machine www.pressmachine-world.com, please indicate the source for reprinting!