Safe operation rules of four-column hydraulic press

How can the four-column hydraulic press be operated safely? Let's take a look at the hydraulic press manufacturer Shanghai WORLD Press Machine.

1. The hydraulic press operator must be trained and master the equipment performance and operation technology before they can work independently.

2. Before operation, all kinds of sundries on the mold should be cleaned first, and any dirt on the hydraulic press rod should be cleaned.

3. The installation mold of the hydraulic press must be carried out under the condition of power failure, and it is forbidden to collide with the start button, handle and foot on the foot switch.

4. Install the upper and lower molds to center, adjust the mold gap, and do not allow one side to deviate from the center. After confirming that the mold is fixed, test the pressure again.

5. Before the hydraulic press works, firstly start the equipment to idle for 5 minutes, and check whether the oil level of the oil tank is sufficient, whether the sound of the oil pump is normal, and whether there is any leakage in the hydraulic unit, pipes, joints and pistons.

6. Start the equipment to test the pressure, check whether the pressure reaches the working pressure, whether the operation of the equipment is normal and reliable, and whether there is leakage.

7. Adjust the working pressure, but it should not exceed 90% of the rated pressure of the equipment, test a workpiece, and then produce after passing the inspection.

8. No smoking, welding and cutting, hot fire, and flammable and explosive materials are not allowed around the hydraulic press. Take fire prevention measures.

9. When the press plate of the body slides up and down, it is strictly forbidden to put your hands and head into the work parts of the press plate and mold.

10. It is strictly forbidden to perform operations such as knocking, stretching, welding, cutting, bending, and twisting on the work while applying pressure.

11. For different hydraulic machine materials and workpieces, when pressing and calibrating, the working pressure, pressure application, and pressure holding times and time of the press should be adjusted at any time, and the mold and workpiece should not be damaged.

12. After the hydraulic press is finished, the power supply should be cut off, the hydraulic rod of the press should be wiped clean, the lubricating oil should be added, the molds and workpieces should be cleaned and placed neatly.

Nowadays, it is very common for us to utilise in automatic power press machine. And the quality of is decisive to production efficiency.

Shanghai Yingxin World Machinery Co., Ltd. serves a wide variety of professional markets and industries across the globe. Contact us at World Press Machine to find the you have always dreamt of.

We are professional in manufacturing mechanical power press, and always emphasize the technology and quality during the producing procedure.

Shanghai Yingxin World Machinery Co., Ltd. will do this by managing our business with integrity and the highest ethical standards, while acting in a socially responsible manner with particular emphasis on the well-being of our teammates and the communities we serve.

According to the latest social survey, more than 50 percent of consumers (across all age demographics) follow a brand before purchasing a product. Therefore, WORLD's content can make or break a customer's decision to conduct business with you.