Matters needing attention in the maintenance process of four-column hydraulic press

The four-column hydraulic press needs regular maintenance, so as to improve the use accuracy and service life of the hydraulic press, and improve the production efficiency. Only trained professionals are permitted to carry out work on machine repairs or replacement of components!

In order to prevent accidents or damage to the machine tool, the following principles must be observed during maintenance:

(1) When a fault occurs, press the emergency stop button on the operation panel to stop the machine tool.

(2) When the machine tool fails to work normally, check the relevant manuals and operating instructions to determine the correct measures to take.

(3) Before overhauling or replacing components, the power must be turned off.

(4) The parts (components) removed during the overhaul should be replaced with the same new parts (components) in situ, and may be tightened with the original specification screws.

(5) Regularly check whether cables and wires are damaged to prevent leakage or electric shock.

(6) Maintenance in the electrical box

(7) Before opening the electrical box, the main switch should be disconnected.

(8) After the main switch is disconnected, the main switch is still live. Therefore, maintenance personnel must pay special attention. Even service staff have to comply. If you need to open the electrical box door for maintenance, you should pay attention to safety, and it is strictly forbidden to touch any charged objects in the box with your hands.

(9) Regularly check the outer surface of the electrical box to keep it clean and dry.

Shanghai Yingxin World Machinery Co., Ltd. is committed to fulfill the demands of our customers with using mechanical power press.

Shanghai Yingxin World Machinery Co., Ltd. would like to provide our customers with as near perfect protection, as near perfect service as is humanly possible and to do so at the lowest possible cost.'

For Shanghai Yingxin World Machinery Co., Ltd. as a whole to adopt an attitude of acceptance toward change and technological innovation, we first have to truly embrace it and practice what they preach. Technological development needs to be more than just another investment, but a complete integration.