maintenance and checking list of 3 in 1 servo roller feeder

2021-06-17

Check or maintenance term table for 3 in 1 roller feeder

Check or maintenance term	Item	Contents
Maintenance term in irregularly scheduled	Equipment cover Touch screen	Clean the equipment cover Clean the touch screer
Daily check and Maintenance tem	Decoiler's loop control function; Emergency stop function	Check if loop control sensor work very well; Check if the emergency buttons work very well.
Weekly check and maintenance term	Drive gears of the straightener feeder part; Material width adjust & guide device at straightener feeder's entrance; Decoiler's Mandrel expansion part.	Check if there is enough grease in movable parts; Fill oil to the gears; Fill grease to decoiler's mandrel expansion parts.
Monthly check term	Decoiler's chains; Synchronous belt of the straightener feeder Press wheel driving chain of the decoiler ,Bearing's position of the decoiler's main axle Air filter.	Add grease to chains; Check if synchronous belts are in good tension condition Add grease on bearings of the decoiler's main axle; Check if the screws are loose or not. Add lubrication oil in air filter and clear water and impurity in air filter