H Type Power Press Machine Manufacturer,Mechanical Press

JW36 H Frame Two Point Power Press Machine

JW36 H frame double crank power press machine(mechancial press, press machine,punching machine,stamping press), capacity from 110ton to 630ton, welded steel body, PLC control, wet clutch, hydraulic overload protected, auto lubricated, touch screen control.

Bigger table better for big sheet stamping and progressive die stamping process. The press can work with NC feeder and transfer system for automatic press line.

SPECIFICATION

ITEM		CODE	UNIT	JW36-110	JW36-160	JW36-200	JW36-250	JW36-315	JW36-400	JW36-500
Nominal Capacity			KN	1100	1600	2000	2500	3150	4000	5000
Slide Stroke Length		S	mm	180	200	250	280	280	300	300
Slide Stroke Speed	Fixed		spm	50	45	35	30	30	20	20
Slide Stroke Speed	Variable		spm	35-55	35-55	25-40	20-35	20-35	15-24	15-23
Max. Die Shut Height		H2	mm	400	450	500	550	550	600	650
Die Shut Height Adjustment		t	mm	90	100	110	120	120	130	130
Side Window Size	F-B	E	mm	650	800	900	950	950	1000	1100
Side Window Size	Height	F	mm	350	400	450	460	460	550	600
Distance Between Uprights		G	mm	1750	1900	2290	2570	2570	2810	3200
Table Size	F-B	D	mm	700	760	900	1000	1000	1100	1200
	L-R	C	mm	1650	1800	2200	2500	2500	2700	3000
	Thickness	H3	mm	140	150	170	180	190	200	210
Slide Bottom Size	F-B	b	mm	600	700	800	900	900	1000	1100
Slide Bottom Size	L-R	a	mm	1350	1500	1900	2200	2200	24000	2700
Table Surface Height		H1	mm	1035	1035	1135	1235	1285	1340	1340
Overall Dimensions	F-B	A	mm	2050	2400	2650	2900	3000	3150	3400
	L-R	B	mm	2400	2650	3150	3450	3450	3700	4200
	Height	H	mm	3450	3950	4280	4800	4900	5500	6000
Motor Power			KW	11	18.5	22	30	37	45	55
Weight(approximate)			kg	18000	22000	33000	42000	43000	56000	77000

OPTIONS

Light curtain; Inverter; Cushion; Decoiler; Straightener; NC Feeder; Transfer Bar; Manipulator;

H FRAME BODY WITH EIGHT SURFACES SLID GUIDES FOR HIGH PRECISION

JW36 straight side power press uses H frame steel welded body which is under heat treatment and ball ballasting treatment to release the welding stress. The body is just one time fixed on the CNC milling center table to machining all holes and surfaces. In this way, the machining precision is much higher than normal process.

The slide guides are four angles eight surfaces type and the gap can be adjusted on both front to rear side and left to right side. Precision is already ensured during machining and just need to fine adjustment when installation or future maintenance.

BIGGER TABLE FOR HOME APPLICANCE AND AUTO PARTS METAL STAMPING

JW36 H frame double crank punch press machine has a bigger table which is more suitable for progressive die stamping and big sheet metal forming. The upper surface of press working table is grinded by high performance grinding machine for better flatness.Bolster size is customized according to the die size. T slots can be machining to customer’s drawing or request. Die quick change device is optional and it can be fitted on the press before shipment if customer orders this QDC system.

Double cross located crankshafts reverse rotated to eliminate each lateral force.Some customized bigger table press will use three stages transmission through adding a middle gear. Pneumatic slide balance cylinder is equipped to balance the slide weight and upper die weight. Press is timing by two big gears which are oil bath in the top oil house. The two gears timing testing had been done before installation to the press machine.

Siemens Motor, Schneider Electric Components

The press is equipped with Siemens main motor and Schneider electric components.

WET TYPE PNEUMATIC CLUTCH AND BRAKE

JW36 Stamping Press with pneumatic wet clutch can work as continuous, inches or single stroke, more choices for operators. Each clutch is under balance testing and temperature testing before assembling to the press. High quality friction discs ensure long service life. No need to change them within 3 years. Special high quality Y type seal rings ensure no oil leaking.

Hydraulic Overload Protected Pump

The press is standard equipped with Japanese SHOWA hydraulic overload pump. Normally the system is set as 110% of the nominal capacity. The press will stop immediately once it is overload than 110% to protect both the press and the die. It is easy to reset the overload as there is a reset switch on the control panel. The system can be reset within 3 minutes.

PLC CONTROL WITH HMI

PLC central control system makes the press easily operation and inspection. HMI has functions of system setting, I/O monitor, counter and preset counter. The operator can set the lubrication frequency by the HMI according to the working time or working stroke times.The press has both mechanical and electrical cam controllers. It is easy to set the cam angles to match the press with automatic uncoiler straightener feeder system or transfer bar system.

PLC CONTROL WITH HMI

The press has both mechanical and electrical cam controllers. It is easy to set the cam angles to match the press with automatic uncoiler straightener feeder system or transfer bar system.

Add

• Exporting Office: 12F, Huaihai Road West, Shanghai, China
• Factory: Picheng World Industrial Park, Danyang City, Jiangsu Province, China

Sitemap

JW36 H type Two Point Power Press Machine