Advantages of presses1

Advantages of presses

What kind of equipment is the press? In fact, it is a new type of pure electric press-fitting equipment, which is widely used in auto parts, engine components, circuit boards, etc. So what are the outstanding advantages of the press compared with the ordinary press? Let the Shanghai press manufacturer tell you about the advantages of the press!

1. Accuracy: closed-loop control of position, speed and torque is realized; the problem of stepper motor out-of-step is overcome;

2. Speed: good high-speed performance, generally rated speed can reach 2000 ~ 3000 rpm;

3. Adaptability: strong anti-overload capability, able to withstand loads three times the rated torque, for transient load fluctuations and requirements

It is especially suitable for the occasion of quick start;

4. Stable: The low-speed operation is stable, and the stepping operation phenomenon similar to the stepping motor will not occur during low-speed operation. Be applicable

For occasions where high-speed response is required;

5. Timeliness: The dynamic response time of motor acceleration and deceleration is short, generally within tens of milliseconds;

6. Comfort: Heat and noise are significantly reduced.

The above are the advantages summarized by Shanghai press manufacturers. As an intelligent, energy-saving and stable press, it is the most accurate press-fitting process at present. If you want to order a press, welcome to call to discuss.