WORLD power press machine manufacturer and supplier 

Tel: 86-15696788493   Email:  sales3@worldpowerpress.com

Home  >  INFO CENTER  >  NEWS  >  What kinds of material that we can use for the straightener?

What kinds of material that we can use for the straightener?

2021-06-07

Straightening machines are widely used in both light and heavy industries. If you are interested in our straightening machines, you can contact us. Read this article to learn more about the coil feeder straightener.

This passage is going to talk about the following introductions of coil feeder straightener:

1) A brief introduction of coil feeder straightener 
2) The using steps of coil feeder straightener
3) Coil feeder straightener use of precautions

1) A brief introduction of coil feeder straightener

The coil feeder straightener is an automatic feeding machine for straightening metal profiles, bars, pipes, wires, etc. The straightener changes the straightness of a bar by squeezing it with straightening rollers. Usually, there are two rows of straightening rollers in varying numbers. The main types of coi feeder straighteners are pressure straightener, balance roll straightener, shoe roll straightener, rotary reverse bending straightener, etc. The machine is also available with two rollers, which rely on the angle change of the two rollers (concave center, double curve rollers) to straighten materials of different.diameters

2) The using steps of coil feeder straightener

The use of coil feeder straightener must comply with the operating procedures. First of all, before the coil feeder straightener is started, check whether the.hydraulic oil of the hydraulic station, gear oil of reducer box and transmission box are stored full Before starting the coil feeder straightener main motor.carry out the angle check and adiustment and hydraulic system working pressure adjustment. Inject lubricant into the lubrication points of the coil feeder straightener and check the operation of the mechanical transmission to make it flexible. The operator of the coil feeder straightener should wear protectiveequipment and should not leave the post or string of posts after starting the machineAfter the oil temperature and pressure of the hydraulic station reach stability, then the straightening roller is lifted to the initial position.If the material is received manually, the steel pipe is sent through the third pair of straightening rollers and then the upper straightening rollers are pressed down and clamped. Then the main motor of the coil feeder straightener is turned on and the steel pipe rotates forward and is straightened at the same time If the coil feeder straightener motor stops, the straightening rollers stop straightening and the upper straightening rollers are lifted and the straightened steel pipe is sent out. If the coil feeder straightener needs to be reversed for straightening, the main machine can be reversed for reverse straightening by using the reverse knob on the operating table. After the main motor stops, the straightening roller stops straightening and the steel pipe is returned to the starting position to repeat the next straightening program instruction. coil feeder straightener shut down, turn off the main power supply and do not change the program controller at will.

3) Coil feeder straightener use of precautions

Carefully observe the straightness of the steel pipe to be straightened, and make sure that the steel pipe is in contact with three-quarters of the straightening rollers when first adjusting the coil feeder straightener, and ensure that the gap is not more than 0.1mm.The straightening speed of the coil feeder straightener should be adjusted reasonably according to the bending degree of the steel pipe and the material of the steel pipe to be straightened.The distance between the upper and lower rollers of the coil feeder straightener is adjusted according to the material, bend and required accuracy of the steel pipe to ensure that the coil feeder straightener is straightened and pressed down.During the straightening process of coil feeder straightener, it is strictly forbidden to touch the straightening roller and the steel pipe in motion with hands, and pay attention to the surface quality of the steel pipe to prevent surface scratches and indentation of the steel pipe.

What is more? Apart from providing customers with high-quality automatic feeding machines, the broad production line of our company also provide customers with various kinds of press machines and cutting machines.

Chat Online 编辑模式下无法使用
Leave Your Message inputting...