Three knowledge points of single-column hydraulic press

1. The hydraulic press operator must be trained and master the equipment performance and operation technology before they can work independently.

2. Before operation, all kinds of sundries on the mold should be cleaned first, and any dirt on the hydraulic press rod should be cleaned.

3. The hydraulic press installation mold must be carried out under the condition of power failure. It is forbidden to collide with the start button, handle and foot on the foot switch.

4. Install the upper and lower molds to center, adjust the mold gap, and do not allow one side to deviate from the center. After confirming that the mold is fixed, test the pressure again.

5. Before the hydraulic press works, start the equipment idling for 5 minutes, and check whether the oil level in the oil tank is sufficient, whether the sound of the oil pump is normal, and whether the hydraulic unit, pipes, joints, and pistons leak.

Where are the advantages of a single-column hydraulic press?

1. It has the characteristics of good structural rigidity, good guiding performance and fast speed.

2. The convenient manual adjustment mechanism can adjust the indenter or the upper worktable to press at any position in the stroke, and can also adjust the length of the fast forward and the construction process arbitrarily within the design stroke;

3. The solid open structure welded as a whole can keep the fuselage rigid enough and have the most convenient operating space.

The following introduces the three major characteristics of the single-column hydraulic press:

1. The solid open structure of the single-column hydraulic press can keep the body rigid enough and have the most convenient operating space.

2. The single-column hydraulic press has the characteristics of good structural rigidity, good guiding performance and fast speed.

3. The convenient manual adjustment mechanism of the single-column hydraulic press can adjust the pressure head or the upper worktable to press at any position in the stroke, and can also adjust the length of the fast forward and the construction process arbitrarily within the design stroke. This article comes from the official website of WORLD Press Machine www.pressmachine-world.com, please indicate the source for reprinting!