1. Unreasonable selection of hydraulic components
The specifications of the boom cylinder are 70/40 non-standard series, and the seals are also non-standard parts, so the manufacturing cost is high and the replacement of the seals is inconvenient. The small cylinder diameter of the boom cylinder is bound to increase the set pressure of the system.
2. Serious wear and tear of hydraulic pump
When running at low speed, the internal leakage of the pump is serious; when running at high speed, the pressure of the pump increases slightly, but due to the wear and internal leakage of the pump, the volumetric efficiency drops significantly, and it is difficult to reach the rated pressure. The long-term operation of the hydraulic pump aggravates the wear and the oil temperature rises, which causes the wear of the hydraulic components and the aging and damage of the seals, the loss of the sealing ability, the deterioration of the hydraulic oil, and finally the failure of the single-arm hydraulic press.
3. The hydraulic system design is unreasonable
The control valve and the full hydraulic steering gear are connected in series with a single pump, the set pressure of the safety valve is 16MPA, and the rated working pressure of the hydraulic pump is also 16MPA. Hydraulic pumps often work under full load or long-term overload (high pressure) conditions, and the system has hydraulic shocks. If the oil is not changed for a long time, the hydraulic oil is contaminated, which aggravates the wear and tear of the hydraulic pump, so that the pump casing of the hydraulic pump bursts. such failures). WORLD Press Machine official website www.pressmachine-world.com, please indicate the source for reprinting!
Copyright © 2019 Shanghai Yingxin World Machinery Co., Ltd. | All Rights Reserved
Hello, please leave your name and email here before chat online so that we won't miss your message and contact you smoothly.
