The operation precautions of the shearing machine and the introduction of energy saving management

Do you know anything about the shearing machine? Next, world press machine will introduce the various processes that we need to pay attention to in the process of operating the shearing machine and its management and energy saving.

In the process of operating the shearing machine, we need to pay attention to the various processes:

1. Start the shearing machine for several cycles of idling, to ensure that under normal conditions, try to cut sheets of different thicknesses, from thin to thick. Make sure the user is familiar with shearing machine performance.

2. Different blade gaps must be adjusted for different plate thicknesses during trial shearing. If the corresponding blade clearance is not adjusted, the blade durability will be affected.

3. Turn on the switch of the pressure gauge during the shearing process, observe the pressure value of the oil circuit, and the pressure should be less than 20MPa when cutting a 12mm plate. This remote pressure regulating valve No.9, the pressure is set at 20-22MPa when it leaves the factory, the user must abide by this regulation, and must not increase the pressure for shearing the surface of the material beyond the specified, causing damage to the machine.

4. The sound is balanced during operation. If the shearing machine is noisy, it should be stopped for inspection.

5. The temperature of the fuel tank increases when the shearing machine is operating<Shut down and rest when it exceeds 60 degrees.

Shearing machine management energy saving:

The connotation of shearing machine management energy saving is that it does not need to adopt various technologies to reduce the energy consumption of the shearing machine's own components, but indirectly achieve energy saving through various organizational measures. It is proposed that energy saving can be achieved by optimizing the workshop layout by using an energy distribution-based method.

Through the calculation of the temperature distribution in the workshop, on this basis, the excess energy is delivered to the area that needs energy through the circulating fan through the control of the energy flow. It is found that under the condition that multiple shearing machines are optional for a task, the no-load energy can be reduced by rationally arranging the shearing machines. When the duration between adjacent steps is too long, use the shutdown energy-saving technology to achieve the purpose of energy saving.

A method for evaluating different production chains, analyzing and estimating energy and resource consumption, provides a basis for selecting the production chain with the least energy consumption. A new workshop scheduling algorithm is proposed to effectively avoid the energy consumption caused by power peaks. ISO50001] expects to improve the energy efficiency of organizations and companies and reduce costs by providing management techniques and standards.

The above is the relevant introduction, I believe that everyone has a certain understanding of the shearing machine.