The operating procedures of the shearing machine and the difference between it and the hydraulic pendulum shearing machine

In the past few years, the shearing machine has become bigger and bigger in the domestic market. There are also many different types of shears on the market. The following world press machine will introduce the safety operation rules of hydraulic gate shears and the difference between it and hydraulic pendulum shears.

Safety operating procedures for hydraulic gate shears:

1. Before operation, wear tight protective clothing, fasten the cuffs, and do not open the hem of the top. Do not wear, take off or change clothes next to the running machine tool, or wrap it around the body to prevent the machine from being strangled. A safety helmet must be worn, the braids should be placed in the cap, and skirts and slippers are not allowed.

2. The shearing machine operator must be familiar with the main structure, performance and usage of the shearing machine.

3. The shearing machine is suitable for shearing all kinds of steel plates, copper plates, aluminum plates and non-metallic material plates whose material thickness is the rated value of the machine tool, and must be materials without hard marks, welding slag, slag inclusion, and welding seams. thickness.

The difference between hydraulic pendulum shears and hydraulic gate shears:

1. The gate shearing machine has high shearing precision

Since the tool holder body of the pendulum shearing machine itself is arc-shaped, it uses the point contact of the arc to ensure the straightness of the sheared material. straightness is accurate.

2. The shearing angle of the hydraulic gate shearing machine is adjustable

When shearing a plate with a thickness of less than 20mm, the pendulum shearing machine cannot adjust the shear angle, so the cut material has a twist-like twist. The narrower the cut material, the greater the distortion and deformation. The trigger can achieve stepless adjustment of the shear angle, and the cut plate is not easy to be distorted and deformed, so as to ensure the machining accuracy of the workpiece. What's more important is that the shear force is stronger when the shear angle is increased.

3. The hydraulic gate shearing machine has a long service life

4-sided shearing cannot be used on the cutting edge of the hydraulic pendulum shearing machine. Because the movement line of the blade frame of the pendulum shearing machine is arc-shaped, only the diamond-shaped blade can be used for two-sided shearing. The guillotine shearing machine tool holder body moves up and down in a straight line, and its upper and lower knife surfaces can be sheared by 4 sides, so the service life of the guillotine shearing machine blade is twice as long as that of the pendulum type.

The above is the introduction of the world press machine. I hope it will be helpful for everyone to understand the hydraulic gate shearing machine.