5% OFF Press Machine Celebration Dragon Boat Festival
The method of reducing the noise of press machine
by：WORLD
2023-05-27
The method of reducing the noise of press machine
4. For vibration caused by pressure pulsation, accumulator and hydraulic hose can be used. The accumulator can absorb noise below 10Hz, and the hydraulic hose can reduce high-frequency noise;
1. The noise of the motor can be reduced by using elastic and flexible couplings, and low-noise motors can be used to reduce noise;
2. Set up anti-vibration pads;
3. Replace the press pipeline with a hydraulic manifold;
4. For vibration caused by pressure pulsation, accumulator and hydraulic hose can be used. The accumulator can absorb noise below 10Hz, and the hydraulic hose can reduce high-frequency noise;
5. The hydraulic pump uses a sound insulation cover;
6. A venting device should be installed in the system. Effectively reducing and reducing noise and vibration is one of the key points in maintaining CNC presses. The above points can effectively improve work efficiency and prolong the service life of intelligent presses.
This article comes from the hydraulic manufacturer WORLD Press Machine official website www.pressmachine-world.com, please indicate the source for reprinting!
Custom message
Related Products
