PRODUCT

Technical characteristics of single-column press

by：WORLD 2023-05-20

Technical features of the press:

1. The fuselage adopts the traditional single-column C-type structure, which is similar to the traditional mechanical punch. The structure is simple and compact, the floor space is small, and the operation is convenient.

2. The main cylinder is a piston-type oil cylinder with a fast cylinder inside, which can realize high-speed descending and slow-speed pressing action. Increase productivity.

3. The oil cylinder is of the upper oil cylinder type. When the stamping slider is working, it is pressed from top to bottom, the lower die is stationary, and the upper die is pressed.

4. The upper part of the fuselage is equipped with a precise positioning device, a mechanical dead limit, and an adjustment device.

5. The precision positioning device is driven by a motor. The positioning accuracy is 0.01mm.

6. The electrical system adopts PLC+system+touch screen+proportional drive, cooperates with the proportional hydraulic system, and sends out instructions according to the process requirements to complete the process cycle action of the machine.

7. Friendly man-machine interface, can freely access 200 groups of parameter programs.

8. The position is positioned by the electronic ruler, and the stroke position can be set arbitrarily. High-precision positioning adopts mechanical dead limit, the theoretical positioning accuracy is ±0.01mm, and the actual positioning accuracy is 0.01-0.02mm.

9. The pressure is detected by the pressure sensor, and the machine pressure can be set arbitrarily.

10. Automatic feeding of mobile workbench.

11. The pressing speed is fast, and the pressing cycle of a single product is 4-5 seconds.

Custom message