Several points of work that need to be prepared before pressing

1. Pay attention to the cleanliness of the working environment on site, try to put the equipment in a dry, clean and ventilated room, and let the 4 anti-vibration foot cups of the press all touch the ground and lock them firmly.

2. Prepare the power supply required for the press, usually single-phase 220V or three-phase 380V. The power supply needs to be protected by a leakage switch. When wiring, the fixing screws of the wire fork and the wire row should be tightened.

3. Prepare some small tools such as adjustable wrench for daily use.

4. Please read the manual clearly before using the device.

5. The operator must be neatly dressed and cannot wear rings, watches, jewelry, bracelets, ties and other items.

6. The operator must be trained or designated by the company to operate the equipment. Do not joke with others while working, and operate with caution.

7. Before operating the machine, it is necessary to check whether the function of each button of the equipment and the safety protection device are normal. Before working, carefully check whether the workstation is properly arranged. Whether there are foreign objects in the work area, the condition of machine tools and implements, etc. Work or start the machine tool after confirmation.