WORLD power press machine manufacturer and supplier 

Tel: 86-15696788493   Email:  sales3@worldpowerpress.com

Several advantages of hydraulic presses compared with other mechanical presses

by:WORLD     2022-09-10


Compared with other mechanical presses, hydraulic presses have the following characteristics:








1. Easy access to maximum pressure








Since the hydraulic press adopts hydraulic transmission and static pressure, the power equipment can be arranged separately, and multiple cylinders can work together, so a large tonnage hydraulic press can be manufactured, such as 700,000.
kN die forging hydraulic press. However, large forging hammers vibrate, requiring large anvils and foundations to prevent shocks, and the crank press is limited by the strength of the crank connecting rod, so it should not be made very large.


















2. Easy access to large working strokes








The hydraulic press is easy to obtain a large working stroke and can exert full pressure at any position of the stroke. Its nominal pressure is independent of the stroke and can be stopped and returned anywhere in the stroke. In this way, it is very convenient for processes that require a long working stroke (such as deep drawing), as well as installation of molds, preloading, sub-loading or troubleshooting.








3. Easy access to large workspace








Because it does not have a huge mechanical transmission mechanism, and the working cylinders can be arranged arbitrarily, the working space is large, which is convenient for organizing automated production lines.








4. The pressure and speed can be adjusted steplessly








The pressure and speed can be easily adjusted steplessly in a wide range. Generally, the three-cylinder hydraulic function can easily obtain three different pressures. If the high-pressure liquid is fed into the middle working cylinder, the primary pressure will be obtained; if the working cylinders on both sides are fed into the secondary working cylinder, the secondary pressure will be obtained; the high-pressure liquid will be fed into the three working cylinders at the same time, and the full pressure will be obtained. And according to the process requirements, it can be used for a long time in a certain stroke. Since the hydraulic pressure can be reliably controlled, overloading can be reliably prevented. In addition, it is also easy to adjust the speed, such as slow speed to avoid impact and so on.








5. Standardization of hydraulic components








The hydraulic components have been applied, standardized and serialized, which brings convenience to the design and manufacture of hydraulic presses, and the hydraulic operation is convenient, which is convenient for remote control and automation.








There are many advantages of hydraulic presses, but there are also some disadvantages. The main problems that still exist are as follows.








①Because high-pressure liquid is used as the working medium (mechanical oil or emulsion), the precision of hydraulic components is relatively high, the structure is relatively complex, the adjustment and maintenance of the machine is difficult, and the current leakage of liquid is unavoidable, not only polluting the work environment, waste of pressurized oil, and a fire hazard when applied in hot work fields.








②There is pressure loss in the liquid flow, so the efficiency is low. The efficiency is especially low when moving at high speed, so the fast and small hydraulic press is not as simple and flexible as the crank press.








Because the hydraulic press has many advantages, it is widely used in industrial production. Especially in the application of forging and stamping production, it has a long history, and it is more advantageous for large-scale hot forging and large-scale deep drawing processes.








With the rapid development of the plastics industry, it has occupied a very important position in plastic molding and processing. It is the main pressing and molding machine for processing thermosetting plastics, rubber products and tetrafluoroethylene cold blanks, and can process long glass fibers and sheets. The physical and mechanical properties of filler thermoisotropic plastics are better than those of injection-molded products.


Shanghai Yingxin World Machinery Co., Ltd. is experienced in producing automatic power press machine mechanical power press products featuring topnotch quality with ODM services available. Welcome to visit our site at World Press Machine.
Dazzle your next event with automatic power press machine mechanical power press and to buy best product, only trust Shanghai Yingxin World Machinery Co., Ltd..
In the boundless Chinese market, there are a number of enterprises that provides automatic power press machine mechanical power press of their own brand over the years, but few have won more support from customers on the international stage than WORLD.
Custom message
Chat Online 编辑模式下无法使用
Leave Your Message inputting...