WORLD power press machine manufacturer and supplier 

Tel: +86-13817590728   Email:  jackow@pressmachine-world.com 

Press fitting process

by:WORLD     2022-12-31
The pressing process of the press:




The whole press-fitting process is divided into five stages: fast-forward, detection, press-fit, pressure-holding, and return.




When the machine is turned on, the device will automatically search for the mechanical origin. After setting the parameters, press the start button with both hands and the indenter will descend to the detection position at the fast forward speed at this position, and then descend at the detection speed to start the detection process. The detection process is up to the set detection limit position. If the workpiece is not detected at the detection limit position, the indenter will stop moving. At this time, the button can be pressed to return to the mechanical origin; when the contact pressure reaches the set value during the detection process , the indenter automatically switches to the pressing speed and starts to press the workpiece. When press-fitted to the set position, the pressure will be maintained according to the holding pressure time set by the user, and the pressure head will return to the set working origin at the set speed when the holding pressure time expires. WORLD Press Machine official website www.pressmachine-world.com, please indicate the source for reprinting!




Custom message
Chat Online 编辑模式下无法使用
Leave Your Message inputting...