Performance characteristics and maintenance methods of hydraulic gate shears

The shearing machine uses a moving upper blade and a fixed lower blade to apply a shearing force to the metal plates of various thicknesses with a reasonable blade gap, so that the plates are broken and separated according to the required size. The following world press machine will introduce the performance characteristics of the hydraulic gate shearing machine and its maintenance method.

Features of hydraulic gate shears:

1. The main engine adopts the structure of QC11Y series hydraulic gate shearing machine.

2. The numerical control system adopts MD11 numerical control system.

3. The back gauge screw adopts imported ball screw + linear guide.

4. Other types of CNC systems can be selected according to user needs.

Hydraulic gate shears maintenance:

1. Use the hardware alarm function of the CNC system

The alarm indicator light can determine the fault location. There are many alarm indicator lights on the hardware circuit board of the numerical control system, so that the fault location can be roughly determined.

2. Make full use of the software alarm function of the CNC system

All CNC systems have self-diagnostic functions. During system operation, the self-diagnostic program can be used to quickly diagnose the system. Once a fault is detected, the fault will be displayed on the form screen as an alarm or each alarm lamp will be lit. During maintenance, the fault of the machine tool can be found according to the alarm content.

3. When a fault occurs, the parameters of the CNC system should be checked in time

The change of system parameters will directly affect the performance of the machine tool, and even cause the machine tool to fail, and the entire machine tool cannot work. The external interference may cause the change of individual parameters in the memory. It is heard that when the machine tool has some inexplicable faults, the parameters of the CNC system can be checked.

4. Spare parts replacement method

When the failure of the machine tool is analyzed and it is found that the circuit board may be faulty, the spare parts board can be used for replacement, and the faulty circuit board can be quickly determined.

The above is the relevant introduction of the world press machine, I hope it will be helpful for everyone to understand the hydraulic gate shearing machine.