Add
• Exporting Office: 12F, Huaihai Road West, Shanghai, China
• Factory: Picheng World Industrial Park, Danyang City, Jiangsu Province, China
Instructions for the use of the four-column hydraulic press motor
by：WORLD
2022-10-27
Instructions for the use of the four-column hydraulic press motor
are an important part of the society and they come in handy in any place where there are automatic power press machine in need of automatic power press machine.
No, this isn't a wonder product and it won't be likely to change your life but it will give your automatic power press machine a kick and bring the extraordinary to the every day. give it a shot at World Press Machine.
In the boundless Chinese market, there are a number of enterprises that provides automatic power press machine mechanical power press of their own brand over the years, but few have won more support from customers on the international stage than WORLD.
①The four-column hydraulic press ensures the concentricity between the output shaft and the machine, or adopts a flexible connection.
②Before the four-column hydraulic press starts the oil motor, the casing should be filled with oil. The housing should always be filled with oil to provide internal lubrication. Otherwise, the oil motor will be damaged and a big mistake will be made.
③Leakage connection: The leakage pipe of the casing must be full diameter, without throttling, and directly connected to the oil tank from the leakage port to keep the casing full of oil. The piping of the leaking pipe must avoid the siphon phenomenon, and the piping of the leaking pipe must avoid the siphoning phenomenon. The oil drain pipe of the four-column hydraulic press motor should be connected to the oil tank separately, and it is not allowed to be connected to the oil return port.
④The external drain pipe of the four-column hydraulic press should ensure that the oil motor casing is filled with oil to prevent the oil in the casing from returning to the oil tank when the machine is stopped.
⑤ Generally, the oil drain port is not connected to back pressure. If back pressure is required, the value should not exceed 0.16-0.20MPa, otherwise the oil pressure will break through the low pressure seal, such as the shaft seal.
⑥ The four-column hydraulic press should ensure that the low-speed and high-torque motor has sufficient oil return back pressure. Special attention should be paid to the inner curve type oil motor. Usually, the oil return back pressure should be 0.3-1.0MPa. The higher the speed, the greater the oil return back pressure. Seriously cause damage.
⑦ The working oil of the four-column hydraulic press should be clean and of appropriate viscosity. WORLD Press Machine official website www.pressmachine-world.com, please indicate the source for reprinting!
are an important part of the society and they come in handy in any place where there are automatic power press machine in need of automatic power press machine.
No, this isn't a wonder product and it won't be likely to change your life but it will give your automatic power press machine a kick and bring the extraordinary to the every day. give it a shot at World Press Machine.
In the boundless Chinese market, there are a number of enterprises that provides automatic power press machine mechanical power press of their own brand over the years, but few have won more support from customers on the international stage than WORLD.
Custom message
