WORLD power press machine manufacturer and supplier 

Tel: 86-15696788493   Email:  sales3@worldpowerpress.com

Hydraulic press installation valve precautions

by:WORLD     2022-11-30
Hydraulic press installation valve precautions











1. Pay special attention to the filtration and cleaning of the oil circuit. Before entering the valve, it is necessary to install a fine filter with a filtration accuracy of less than 5um.

2. After the installation of all hydraulic systems, it is necessary for the four-column hydraulic press manufacturer to completely clean the oil circuit before installing the valve into the system, and investigate the purification of the filter element together. After the system is flushed for 24-36 hours, remove the filter, clean or replace it. filter element.

3. Welded connectors are not allowed for hydraulic pipelines, and it is recommended to choose connectors with a ferrule type 24-degree cone structure.

4. Before installing the valve, the four-column hydraulic press manufacturer shall not adjust the installation at will.

5. The installation surface of the valve should be smooth, straight and clean.

6. When installing the valve, the hydraulic press manufacturer should check whether there is dirt on the installation surface; whether the oil inlet and outlet are connected well; whether the O-ring is incomplete; whether the positioning pin hole is accurate. When installing the valve on the adapter plate, tighten the adapter screws evenly. Before connecting the circuit, pay attention to check the connecting column, and enter the polarity check after everything is normal.





7. The fuel tank of the system must be sealed with an air filter and a magnetic oil filter. It is necessary to change the new oil through strict filtration.

8. The valve should be used strictly in accordance with the conditions specified in the manual.

9. The hydraulic oil should be changed regularly, and the oil should be changed every six months, and the oil should be kept within the range of 40-50 degrees as much as possible.

10. When a serious defect occurs in the system, the four-column hydraulic press manufacturer should first check and remove the electrical and valve unexpected links, and then check the valve. This article is from the official website of the manufacturer WORLD Press Machine www.pressmachine-world.com, please indicate the source for reprinting!



Maintaining automatic power press machine is not as easy as it may seem. You have to do plenty of important tasks. So cruel is the truth unless you've got a to help you.
Many websites provide additional information on the topic of mechanical power press. One such site worth visiting is World Press Machine.
Looking for Manufacturers in China? Then Shanghai Yingxin World Machinery Co., Ltd. is the right choice. we are a well known automatic power press machine mechanical power press Manufacturers and suppliers from China.
The automatic power press machine mechanical power press is an all-servo system capable of storing hundreds of automatic power press machine process parameters to provide custom automatic power press machine profiles for each automatic power press machine type and automatic power press machine configuration.
Custom message
Chat Online 编辑模式下无法使用
Leave Your Message inputting...