WORLD power press machine manufacturer and supplier 

Tel: 86-15696788493   Email:  sales3@worldpowerpress.com

Home  >  INFO CENTER  >  NEWS  >  How does a link drive press work

How does a link drive press work

2021-07-02

With the rapid development of industry and other related industries, the requirements of production equipment in related fields are becoming higher anc higher. However, some traditional forging equipment can not meet the existing requirements, so in order to promote the development of the industry,link drive press, high-performance equipment has been developed and put into use. This is an advanced shaping and rapid development prospect of industrial manufacturing machinery and equipment. It can not only greatly improve production efficiency, but also promote the development of related industries. So, how does chain press work in related fields? Here we briefly introduce, hoping to help vou better understand the link drive press, a new type of equipment.


The main points are as follows:
What is a link drive press
How does the connecting rod drive press work
Application advantages of this press
Summary


What is a link drive press
Link drive press is an advanced press equipment, which is the integration of many press. It usually consists of wire head unit, feed mechanism, press and wire tail. The fastest beat can exceed 25 beats per minute, so it can meet the needs of high-speed automatic production. Wire head unit can be divided into stacking unit, tape and cleaning unit, oiling equipment, etc. Feeding mechanism is generally composed of feeding arm; press is generally divided into multiple sliders and sliders, according to different needs, tail is generally composed of convevor belt. The connecting rod mechanism can not only reduce the sliding speed, the impact noise and vibration of the tool, but also achieve better working conditions.


How does the connecting rod drive press work
The chain press is driven by a motor through a transmission mechanism to exert technical force on the work piece. The transmission mechanism is the deceleration mechanism of belt transmission and gear transmission. When the press is working, the motor drives the large belt pulley through the triangle belt (usually twice the flywheell, and drives the crank and slider mechanism through the gear pair and clutch, so that the slider and punch are directly downward. After the forging work is completed, the slider returns, the clutch is automatically disconnected, and the automatic device on the crankshaft is.connected, so that the slider stops near the upper dead point. Because the load of the press is impacted, that is to say, the working time of forging in the working cycle is very short, so the flywheel is installed in the transmission system. After starting the motor according to the average power, the flywheel runs to the rated speed and accumulates kinetic energy. The driving power of the motor is less than the load, the speed of the motor decreases, and the flywhel releases accumnulated kinetic energy to compensate when the contact between the blank and the brush begins to forge. After the forging work is completed, the flywheel accelerates to accumulate kinetic energy for the next use.


Application advantages of this press
Compared with ordinary presses, the application advantages of this new type of chain press are as follows:
(1) Improve production efficiency.After installing several Abrasives at one time, it can replace the single machine automatic contact single working mode, with higher automation degree and higher production efficiency.
(2) The cost of stamping production is low.The printing press realizes the process from blank to stamping parts through stamping process. This behavior not only shortens the production cycle of stamping parts, but also further improves the production efficiency, further reduces the efficiency of personnel investment, thus reducing the comprehensive.cost of stamping parts production.
(3) Reducing area.Compared with the traditional single press production line, the press not only occupies less space, but also has a higher degree of automation. The use of operators and workplaces will save the transportation and stacking area of semi-finished stamping parts for once stamping, so as to facilitate the logistics of finished products. At the same time, it can also save logistics space


Summary
Therefore, compared with other press,link drive press has more advantages and wider application in actual production. It can not only save energy and protect the environment, but also realize flexible processing, whether it is drawing, blanking, holding and other complex processes can be achieved. According, to different materials, different processes can also set appropriate processing curves. So it can be said that the prospect of connecting rod drive press is very bright. If you want to know more about chain press or other types of press, please remember to consult us. We will definitely provide vou with the most satisfactory answer.

Chat Online 编辑模式下无法使用
Chat Online inputting...