Four tips for long-term reliable operation of hydraulic system of hydraulic press
What are the four major skills for the long-term reliable operation of the hydraulic system of the hydraulic press? Today, Shanghai WORLD Press Machine will tell you that in order to ensure that the hydraulic system of the hydraulic press can work reliably for a long time, we must pay attention to the following aspects in the design or use process:
(1) Prevent air from mixing into the system and discharge the air mixed into the system in time.
Air entering the hydraulic system of the hydraulic press will cause adverse consequences such as noise and oxidative deterioration of the oil. Measures must be taken to prevent the air from being mixed in, and the air mixed into the system must be discharged frequently.
(2) Always keep the oil clean.
Impurities mixed in the oil will cause the spool valve to get stuck, block the throttling holes or gaps, make the hydraulic components unable to work normally, and aggravate the wear of the relative moving parts. In addition to installing an oil filter and various devices to prevent external impurities from entering the system, it is also necessary to regularly clean the oil filter and replace the old oil. When assembling the hydraulic system of the hydraulic press, all hydraulic components and pipes should be cleaned. After the test run, it is best to disassemble the components and pipes, clean them carefully, and then install them.
(3) To prevent leakage.
External leakage is not allowed, internal leakage is unavoidable, but its leakage cannot exceed the allowable value. If there is too much leakage, the pressure will not rise, and the hydraulic motor cannot achieve the expected force (or torque). And the size of the oil leakage is related to the pressure level, which will make the movement of the working parts unstable. In addition, due to excessive leakage, the volume loss increases and the oil temperature rises. In order to avoid excessive leakage, there should be appropriate clearances between the relatively moving parts and appropriate sealing devices should be installed.
(4) To prevent the oil temperature from being too high.
Generally, the oil temperature of the hydraulic system of the hydraulic press should be kept at 15~50℃. Excessive oil temperature will bring a series of adverse consequences.
The rise of oil temperature will make the oil thinner, the leakage will increase, and the system efficiency will decrease. The oil works at a higher temperature and is easy to deteriorate. To avoid high oil temperature, in addition to taking measures to avoid oil heating (such as oil pump unloading and volumetric speed regulation for high-power systems), it is also necessary to consider whether the oil tank has sufficient heat dissipation capacity. When necessary, cooling devices can be added.
I believe that remembering the above points, your hydraulic system will be able to work reliably for a long time!
are an important part of the society and they come in handy in any place where there are automatic power press machine in need of automatic power press machine.
Exceed our customers’ expectations by being the leading provider of safe, responsive, value-added services in the mechanical power press industry.
There are different types of , mainly automatic power press machine and automatic power press machine.