WORLD power press machine manufacturer and supplier 

Tel: +86-13817590728   Email:  jackow@pressmachine-world.com 

Features of rotary hydraulic press

by:WORLD     2022-12-23


Features of multi-station CNC press machine:



1. Take the liquid pressure of 2-20MPA as the power source, and connect the external three-phase AC380V 50HZ or three-phase AC220 60HZ AC power supply.

2. The liquid is used as the medium to transfer the energy, and the imported low-noise gear oil pump is used. 3. The force measuring sensor is used to directly measure the pressing force, and the accuracy is plus or minus 5N. The pressure signal control system adopts digital signal transmission, which accurately guarantees the force measuring sensor. The accuracy of the device is not affected by transmission. 3. When the device is in standby, the noise is much smaller than similar products when sliding up and down.

4. The solid open structure with integral welding can keep the body with sufficient rigidity, and at the same time have the most convenient operation space,

5. There are two control modes, manual and semi-automatic. Manually, the press-fitting upper die can be stopped within any range of travel. It is equipped with an emergency recovery button and an infrared hand guard device. (Service technology: 400-6626-500)

6. The press-fitting stroke of this series of presses transmits the displacement to the programmable controller through the rotary encoder, and is automatically controlled by the programmed program.



7. The pressure, stroke, pressure holding time and closing height can be adjusted by the customer on the touch screen.

8. Accurate display of displacement Minimum unit 0.01.

9. Interference detection (preset the upper and lower limits of the force at the 5-point position)



10. Draw the force-displacement curve with the X-axis as the displacement and the Y-axis as the force.



11. Press-fit data can be saved in EXCEL format,



12. It can store 20 sets of setting parameters and 8 sets of different equipment actions.



13. The hydraulic system is built into the frame, and the appearance is neat, light and stable. This article is from the official website of the manufacturer WORLD Press Machine www.pressmachine-world.com, please indicate the source for reprinting!


Custom message
Chat Online 编辑模式下无法使用
Leave Your Message inputting...