Detailed description of the pressing process of the pressing machine

Maximum output: The 'maximum output' is set to protect the pressure sensor and the product from being damaged during the press-fitting process. In both automatic and manual modes, the pressure value detected by the pressure sensor exceeds the 'maximum output' and an alarm will be issued. 'Maximum output' is the largest of all output settings of this device. Under normal circumstances, it is sufficient to set the 'Maximum Output' 300kgf larger than the 'Pressure Alarm Return Upper Limit'.

Maximum stroke: The setting of 'maximum stroke' is to perform software limit protection for the downward running distance of the electric cylinder. 'Maximum stroke' is the largest one of all the position parameter setting values ​​of this equipment. In general, it is sufficient to set the 'Maximum stroke' 2mm larger than the 'Core end position'.

Origin position: 'Origin position' is the position where the indenter stops after the mechanical reset is completed. The 'origin position' must be set so that the indenter stops at this position just so that the shaft can be stuck.

Slow position: After the press-fitting shaft indenter reaches the 'slow position', it will decelerate and press-fit at the 'buffer speed'. The setting 'slow position' should be greater than 'origin position' and less than 'start press position'.

Start press-fitting position: the position where the shaft core will be riveted to the bearing during the pressing process of the electric cylinder. When the manual electric cylinder is pressed down, the position when the 'current output of the pressing shaft' suddenly increases to 200kgf is the position where the shaft core is riveted to the bearing. Reducing the 'current position of the pressing shaft' by 2mm at this time means 'starting pressing Location'.

Holding time: After the product is pressed, hold the pressure for a period of time, and the pressing shaft will return to the origin.

Fast forward speed: the speed of the press-fitting axis from the 'origin position' to the 'slow speed position'.

Cushioning speed: the speed of the press-fitting axis from the 'slow speed position' to the 'start press-fitting position'.

Press-fit speed: the speed at which the press-fit shaft runs downward after it reaches the 'start press-fit position'.

Return speed: the speed at which the pressing axis returns to the origin after the pressure holding is completed.

Empty vehicle shutdown: When the power of the equipment is turned on, no operation is performed on the equipment within the set time of 'empty vehicle shutdown'. When the empty vehicle shutdown time expires, the power supply of the equipment will be automatically disconnected, making the equipment more energy-saving and environmentally friendly. This article is from the official website of the manufacturer WORLD Press Machine www.pressmachine-world.com, please indicate the source for reprinting!