WORLD power press machine manufacturer and supplier 

Tel: 86-15696788493   Email:  sales3@worldpowerpress.com

Correct use and characteristics of hydraulic sheet metal bending machine

by:WORLD     2022-08-08

Do you know the correct use steps of the hydraulic sheet metal bending machine and its specific characteristics? The following is a brief description of the world press machine.

Correct use of hydraulic sheet metal bending machine:

1. In the process of handling the hydraulic sheet metal bending machine, we must pay attention to the position of the center of gravity to avoid the possibility of dumping.

2. Before operating the hydraulic sheet metal bending machine, be sure to read the instructions of Nantong Dali Machine Tool Co., Ltd. carefully, and then operate it after understanding the machine tool.

3. During the work of the hydraulic sheet metal bending machine, pay attention to no people and objects within the movement range of the moving parts, so as to avoid extrusion and scratches.

4. Each valve of the hydraulic system of the hydraulic sheet metal bending machine is adjusted locally, and it is not necessary to change it under normal circumstances. If necessary, be sure to hire a professional.

5. If maintenance is required, the slide block of the hydraulic sheet metal bending machine must be firmly dropped, and attention should be paid to avoid the range where the high-pressure oil may be shot.

6. The hydraulic sheet metal bending machine is equipped with an emergency stop button, which can be stopped quickly in case of emergency.

7. When bending the hydraulic sheet metal bending machine, pay attention to the direction of the workpiece after bending, and do not bruise it.

8. The maintenance of the motor part of the hydraulic sheet metal bending machine should only be carried out by experienced personnel with an electrician maintenance operation certificate. It is strictly forbidden for any person without an electrician operation certificate to touch the electrical parts of the hydraulic sheet metal bending machine.

9. The power introduction wire of the hydraulic sheet metal bending machine must be in accordance with the wire diameter and reliable safety grounding wire required by the drawing.

10. Sharp objects and heavy objects cannot be pressed on the moving wires of the hydraulic sheet metal bending machine.

Features of sheet metal hydraulic bending machine:

1. It adopts all-steel welded structure with sufficient strength and rigidity.

2. Hydraulic upper transmission, the oil cylinders at both ends of the machine tool are placed on the slider to directly drive the sliding work.

3. The slider synchronization mechanism adopts torsion shaft forced synchronization.

4. It adopts mechanical block structure, which is stable and reliable.

5. The slider stroke is motorized and quickly adjusted, manual fine-tuning, and counter display.

6. Wedge-type deflection compensation mechanism to ensure high bending accuracy.

The above is the relevant introduction. I believe that everyone has a certain understanding of the sheet metal hydraulic bending machine.



Most people who see a in operation for the first time are amazed at how well the automatic power press machine is managed.
For more information on this topic and others, please visit World Press Machine. We are among the top manufacturers of mechanical power press automatic power press machine in China, and we serve big names in mechanical power press industry. You can rely on us for our high quality . Send your enquiry!
If something seems too good to be true, then it can be a , which provides automatic power press machine value over its cost.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...