WORLD power press machine manufacturer and supplier 

Tel: 86-15696788493   Email:  sales3@worldpowerpress.com

Common skill problems in hydraulic press equipment

by:WORLD     2022-11-23




Common skill problems in hydraulic press equipment






1. Bolt connection

The bolt connection is the basic equipment in the hydraulic press, but when the operation is improper and the connection is too tight, the bolt may show metal fatigue due to the long-term effect of electromagnetic force and mechanical force, so as to induce shearing, thread sliding and other components and equipment. Loose phenomenon, bury the hidden trouble. For the bolt connection used for conducting current in electrical engineering, it is necessary to master the mechanical effect and electrothermal effect between bolts and nuts, and compact and compress to prevent the increase of touch resistance due to loose crimping, which will cause heat and touch. A series of chain reactions, such as surface oxidation and resistance increase, lead to overheating and melting of the connection, resulting in a short circuit to ground and disconnection.

2. Oscillation

1. The pump is mainly formed by the influence of factors such as large bearing clearance, poor concentricity between the rotor and the casing, or excessive friction between the rotor and the stator.

2. The causes of the motor include large bearing clearance, unbalanced rotor or uneven air gap with the stator.

3. Equipment operation, if the process operation parameters violate too many additional parameters, it is easy to cause the imbalance of pump operation stability, such as the sensation caused by the unstable flow control of the outlet valve, etc., which requires the equipment and equipment technology to be as close to the additional parameters as possible. to operate.

3. Overcurrent

There may be three reasons for this situation in the hydraulic press: the pump bearing is damaged, and there are foreign objects inside the equipment; the motor overload current setting is too low, the line resistance is too high, etc.; the medium used in the process operation exceeds the design capacity of the pump due to its high density or high viscosity.

4. Electrical equipment

1. Improper operation of the barrier switch equipment leads to the lack of touch pressure and touch area of ​​the moving and static contacts, resulting in electrothermal oxidation and increased resistance on the touch surface, and contact ablation becomes an accident.

2. The arc contact finger and contact equipment of the circuit breaker are incorrect, and the piercing process, touch pressure, synchronicity, and opening and closing speed cannot meet the requirements, which will cause the contacts to overheat and prolong the arc extinguishing time, resulting in the differentiation of the insulating medium. The pressure surged, causing the circuit breaker to explode.

3. There is an error in the pressure regulating equipment or the equipment falls into the debris and jams the organization. If it is not dealt with in time, there will be incidents of varying degrees.

4. The main transformer insulation is damaged or broken down. When the main transformer hanging core and high-voltage pipe equipment fall into the nut and other sundries, and the sealing equipment has errors, it will directly affect the change of the main transformer insulation strength.

5. The primary winding of the current transformer is opened due to the careless maintenance of the equipment, and a high overvoltage will occur, endangering the person and the equipment. This article comes from the official website of WORLD Press Machine www.pressmachine-world.com, please indicate the source for reprinting!


As we have known for quite some time, the success of WORLD in the future will depend greatly on our ability to strike a balance between valuable human insight and interaction with technology.
Are you looking for more information regarding mechanical power press automatic power press machine? Visit World Press Machine and contact us as soon as possible!
The manufacturing industry is changing fast, so, for Shanghai Yingxin World Machinery Co., Ltd., being able to pivot and adapt as the marketplace shifts is imperative.
An easy and inexpensive mechanical power press solution can be easily obtained now through purchasing a mechanical power press automatic power press machine online. Find your solution at World Press Machine, your demand will be satified.
Although there are various available in the market (such as automatic power press machine, automatic power press machine, and automatic power press machine), recent study results have made this automatic power press machine mechanical power press a preferred mechanical power press choice of the people.
Custom message
Chat Online 编辑模式下无法使用
Leave Your Message inputting...