CNC single-column press features

1. Take the liquid pressure of 2-20MPA as the power source, and connect the external three-phase AC380V50HZ or three-phase AC22060HZ AC power supply.

2. The liquid is used as the medium to transmit energy, and the imported low-noise gear oil pump is adopted.

3. The load cell is used to directly measure the pressing force, and the accuracy is plus or minus 5N. The pressure signal control system adopts digital signal transmission, which accurately ensures that the accuracy of the load cell is not reduced by transmission.

4. When the device is in standby, the noise does not exceed 75 decibels when sliding up and down.

5. The solid open structure with integral welding can keep the body with sufficient rigidity, and at the same time have the most convenient operating space,

6. There are two control modes, manual and semi-automatic. Manually, the press-fit upper die can be stopped within any range of travel. It is equipped with an emergency recovery button and an infrared hand guard device.

7. The press-fitting stroke of this series of presses transmits the displacement to the programmable controller through the rotary encoder, and is automatically controlled by the programmed program.

8. Customers can adjust the pressure, stroke, pressure holding time and closing height on the touch screen.

9. The hydraulic system is built into the frame, and the appearance is neat, light and stable. 1. The speed-increasing hydraulic cylinder is adopted, and the work is fast first and then slow, with low noise, high efficiency and low energy consumption.

10. The slider is limited by the upper and lower electronic sensors, which has a long service life and is easy to operate.

11. The output of this series of hydraulic machinery is 5-50tf (1tf=1000kgf=9.8KN), and can also be customized according to customer requirements.

WORLD Press Machine official website www.pressmachine-world.com, please indicate the source for reprinting!