11 advantages of the press

(1) The drawing accuracy of the formed product is greatly improved.

(2) Reduce the wrinkle and damage of the finished product.

(3) The damage of the mold is reduced, and the maintenance and repair times of the mold are reduced, thereby improving the life of the mold.

(4) Forging of plates that cannot be done by traditional presses can be realized by presses.

(5) The vibration and noise during processing are greatly reduced, which improves the harsh working environment of the previous stamping factory.

(6) Reduce power loss, save energy consumption, and improve economic benefits.

(7) There is no wear problem of the clutch and brake of the traditional press, which saves the manpower, material resources and financial resources spent on overhauling in this regard.

(8) In order to obtain high-quality deep-drawing parts, it is necessary to make very fine and precise adjustments to the pressure of the mold reverse device and the ejector pins. The press can make these adjustments very simple and convenient.

(9) The traditional press needs to be finely adjusted after each die change, which is time-consuming and labor-intensive. The use of a controlled press can produce an acceptable product immediately after a die change.

(10) After mold trial or mold replacement, the 'inching operation mode' used in mold adjustment requires higher operating skills, while the press can perform a 0.01mm inching operation every time when the mold is adjusted, so that the mold is adjusted. The adjustment operation becomes simple and convenient.

(11) It is impossible for the crankshaft of the traditional press to change the running direction frequently, but the press can simply realize the positive and negative reversal changes of fretting. There are also some other effects. WORLD Press Machine official website www.pressmachine-world.com, please indicate the source for reprinting!